C-shaped steel forming machine

The fully automatic C-shaped steel machine is a single roll forming unit that can produce various specifications of C-shaped purlin finished products with rolling rolls. It mainly consists of a passive loading frame, leveling device, punching device, post forming cutting device, hydraulic station, computer control system, etc.

The C-shaped steel products rolled by the fully automatic C-shaped steel machine have good tensile, bending, and compression properties, good flatness, fully automatic fixed length cutting, automatic punching, good automation degree, and suitable and convenient installation speed. It is a single roll forming unit that can produce various specifications of C-shaped purlin products with a set of rollers. The main body of the fully automatic C-shaped steel machine is 9 meters long, 1.1 meters wide, and 1.6 meters high; Net weight of 6 tons. The frame is made of 350H steel, the main shaft is made of 45 # round steel, and all wheels are made of bearing steel material, which has undergone quenching and tempering treatment.

The products produced by fully automatic C-shaped steel machines can be used as the main load-bearing structures of large and medium-sized industrial and civil buildings, such as factory buildings, warehouses, locomotive depots, aircraft hangars, exhibition halls, cinemas, sports venues, and market flower sheds, for roof load-bearing and wall level support.

The motor power of the fully automatic C-shaped steel machine adopts 11KW-6 poles, producing 8-12 meters per minute. Leveling device is used for front leveling, with two on top and three on bottom; After leveling, one-on-one is used. The equipment adopts an external adjustment form, with single-sided adjustment, suitable adjustment speed, and simple operation.

The main technical parameters of the fully automatic C-shaped steel machine are:

Installation dimensions: 13500mm × 2200mm × 1500mm

Number of molding channels: 13-15 channels

Roller material: Gcr15

Host power: 11KW

Hydraulic station power: 11KW

Hydraulic station pressure: 18-20Mpa

Forming speed: 9-10m/min

Cutting blade punching material: Cr12

Electrical Control System: Industrial Computer PLC Variable Frequency Control

Board thickness: 1.5-3.0mm

Rolling specifications: specifications between 80-300