Spine tile machine

The ridge tile forming machine adopts roll forming technology, combined with mold hydraulic forming. The product is widely used for connecting color steel plate roofs in buildings. The main unit is controlled by a programmable controller and touch screen, and the speed is continuously adjustable. The plate shape can be customized according to customer requirements. Easy to maintain and debug machines and replace molds.

Roof tile forming machine

Material thickness: 0.4-0.6mm

Molding process: 10 molding steps

Molding speed: 12-15m/min

Drive mode: motor drive, gear chain transmission

Motor power: 4KW, variable frequency speed regulation

Tool material: Cr12Mov heat-treated

Rack size: H400

Wear tight protective clothing before operating the ridge tile forming machine. The cuffs should be fastened tightly. The hem of the jacket should not be opened. It is not allowed to wear, remove or entangle the machine body with the machine tool. Prevent the machine from being twisted. Wear a hat with braids, and do not wear skirts or slippers. Used for cutting various steel plates, copper plates, aluminum plates, and non-metallic material plates, its material thickness is the rated value of the machine tool, and it is a material without hard marks, welding slag, slag inclusions, and welds. Excessive thickness is not allowed. Office buildings include cross color steel plate suspended ceilings, additional roof floors, large-span factory buildings, and light steel structure circular canopies.

The roof tile forming machine uses steel plate as the base material (tensile strength 5600KG/CM plus design rolling forming), which can meet the requirements of the specifications and has the characteristics of low thermal conductivity and good insulation effect The shelf life of the layered black steel plate after coating is 10-15 years. After spraying paint every 10 years, the lifespan of the board can reach over 35 years.