Maintenance and preparation before starting the double-layer tile press machine

The double-layer tile press adopts a precision suitable thick walled three roll mirror calender with good rigidity, which can finely adjust the gap between the calendering rollers. Check whether the lower shaft is in a straight line and find a straight line to straighten it. The color steel tile press and hydraulic swing shearing machine have slow return speed and loud noise. Adjust the left and right sides of the lower shaft to be horizontal. The thickness tolerance of the plastic core board is protected, and the phenomenon of poor performance from row to row is also well controlled and utilized in terms of material.

Here are the maintenance methods for the double-layer tile press:

1. The lubricating oil inside the motor bearings should be regularly changed and stained, and the electrical components should be checked regularly for normal operation.

2. Regularly check whether the V-belt, handle, knob, and button are damaged. If they are severely worn, they should be replaced in a timely manner and reported for spare parts supplementation.

3. Regularly inspect and repair switches, fuses, handles, and ensure their stable operation.

4. Oil, lubricate, and clean the machine tool 10 minutes before leaving work every day.

5. It is strictly prohibited for non designated personnel to operate the double-layer color steel tile press, and the machine should be stopped when people leave.

6. The widened double-layer tile pressing machine is used according to the corresponding trends and characteristics in the specific design and management process, to protect the quality during the tile pressing process and meet important maintenance and upkeep requirements.

7. Strictly follow the operating procedures for operation.

8. Before each startup, add lubricating oil according to the lubrication chart requirements at regular, fixed, and quantitative intervals. The oil should be clean and free of sediment.