Precautions for the production of color steel tile press machine

The color steel tile equipment industry also has dangerous operating procedures during the production process, please pay attention to installing chain boxes. There should be no missing links outside. And when the color steel tile equipment is running, people should not be too close to the discharge port of the color steel tile equipment to avoid causing harm.

The tiles produced by color steel tile equipment are also prone to injury. Please pay attention to the width and thickness of the tiles.

The area that is not conducive to people's access during the production process of color steel tile equipment is the cutting head. So I hope that in the process of using color steel tile equipment

Everyone should pay attention to themselves. According to the standard travel operation, the electrical precautions for the tile press are as follows:

1、 Electricians need to understand the types and performance of the circuits and equipment on site. Without understanding the performance of the equipment, they cannot take risks in using it.

2、 Electricians set the time to check motors and electric control consoles, and handle them according to the situation during inspection. When checking the degree of the motor, first check if there is no power, and then check based on the back of the hand.

3、 Except for temporary construction work, temporary wires should not be installed, lights should not be hung randomly, tools and welding equipment should use stable sockets, and previous wires should not be changed arbitrarily.

4、 Regularly inspect and care for his products according to regulations, and remove unused electrical product circuits.