Electrical precautions and debugging methods for color steel equipment and color steel tile press

Precautions for electricity usage of tile press machine

1、 Electricians should understand the type and performance of the workshop's wiring and equipment. Without a clear understanding of the equipment's performance, they should not take risks in using it.

2、 Electricians need to set a time to check the condition of motors and electric control consoles. If they see any problems during the inspection, they should handle them at an appropriate speed. When checking the degree of the motor, first check that there is no power, and then check based on the back of the hand.

3、 Except for temporary construction work, temporary wires should not be installed, lights should not be hung randomly, tools and welding equipment should use stable sockets, and previous wires should not be changed arbitrarily.

4、 According to regulations, his products should be inspected and cared for on schedule, and unused electrical product circuits should be removed.

Debugging of Color Steel Tile Pressing Machine

1. First, align the height of the four corners of the front and rear rows of the color steel tile press equipment from the main frame to the upper end of the bottom shaft. Then, from the row to the back row, find a straight line and check if the lower shaft is in a straight line. Adjust the left and right sides of the lower shaft to be horizontal.

2. Find the center of the color steel tile press equipment row and the rear row, then tighten the locking nuts on both sides. Draw a straight line in front and behind the center of the middle wheel, adjust the gap between the upper and lower shafts, and then adjust the machine along the straight line.

3. Color steel tile press equipment - debugging method for the deviation of the tile press plate, such as running the plate to the right, placing a pad on the left corner (feeding rack), or lowering the bottom to the right (which axis deviates and which axis is flat, and the upper axis falls with the bottom axis).